background image

88

Notes on Use and Installation

l

 

Do not aim the camera at the sun

Never aim the camera at the sun even with the camera power off.

l

 

Do not shoot intense light

Intense light such as a spotlight may cause a bloom or smear. A vertical stripe 

may appear on the screen. However, this is not a malfunction.

l

 

Treat the camera with care

Dropping or subjecting the camera to intense vibration may cause it to 

malfunction.

l

 

Never touch internal parts

Do not touch the internal parts of the camera other than the parts specified.

l

 

Do not submerge in water 

The camera has some protection to water (see IP rating), and can be used 

indoors or outdoors. If the camera was submerged in water, turn off the power 

and contact your dealer. 

l

 

Keep the camera installation away from video noise

If cables are wired near electric lighting wires or a TV set, noise may appear in 

images. In this event relocate cables or reinstall equipment.

l

 

Check the ambient temperature and humidity

Avoid using the camera where the temperature is hotter or colder than the 

specified operating range. Doing so could affect the internal parts or cause the 

image quality to deteriorate. Special care is required to use the camera at high 

temperature and humidity.

l

 

Should you notice any trouble

If any trouble occurs while you are using the camera, turn off the power and 

contact your dealer. If you continue to use the camera when there is something 

wrong with it, the trouble may get worse and an unpredictable problem may 

occur.

Содержание IK-WF51R


























Отзывы: