16
POWER
COLLISION
LINK
RECEIVE
PARTITION
1
2
3
4
5
120V AC
12V DC adapter
UL Listed power supply (not supplied)
16
16
1
2
Ethernet switch
(not supplied)
General Connection (without PoE)
1. Connect the camera to an Ethernet switch via LAN cable.
2. Connect the power cable from a power unit (not supplied) to the appropriate port of
the general I/O terminal.
(See page 12).
3. Connect the PC to an Ethernet switch via Ethernet cable.
Client PC
(not supplied)
3
NOTE
l
Recommended power cord is twisted pair line with a minimum wire size of 18 AWG.
l
The recommended power supply for this camera is 15 watts minimum.
l
When PoE is connected, do not supply 12V DC to the I/O terminal.
