73
Preference
On this page, you can tune the White balance, Image adjustment and 3D Noise reduction parameters.
You can configure two sets of preferred settings: one for normal situations, the other for special
situations, such as day/night/schedule mode.
White balance: Adjust the value for the best color temperature.
■ Auto: It will automatically adjust the color temperature of the light in response to different light sources.
You may follow the steps below to adjust the white balance to the best color temperature.
1. Set the White balance to
Auto
.
2. Place a sheet of white paper in front of the lens, then allow the Network Camera to adjust the color
temperature automatically.
3. Click the
On
button of
Fix current value
and confirm the setting while the white balance is being
measured.
■ Manual: This item allows users to manually tune the R gain & B gain ratios.
Image Adjustment
■ Brightness: Adjust the image brightness level, which ranges from 0% to 100%.
■ Contrast: Adjust the image contrast level, which ranges from 0% to 100%.
■ Saturation: Adjust the image saturation level, which ranges from 0% to 100%.
■ Sharpness: Adjust the image sharpness level, which ranges from 0% to 100%.
■ Gamma curve: Select the
Optimize
mode. Or select the
Manual
mode, and pull the slide bar pointer
to change the preferred level of Gamma correction towards higher contrast or towards the higher
luminance for detailed expression for both dark and lighted areas of an image.
Sensor Setting 1:
For normal situations
