Toshiba IK-WB80A Скачать руководство пользователя страница 56

Страница: 56 / 123

RTSP port /RTP port for video, audio/ RTCP port for video, audio

■ RTSP (Real-Time Streaming Protocol) controls the delivery of streaming media. By default, the port

number is set to 554.

■ The RTP (Real-time Transport Protocol) is used to deliver video and audio data to the clients. By

default, the RTP port for video is set to 5556 and the RTP port for audio is set to 5558.

■ The RTCP (Real-time Transport Control Protocol) allows the Network Camera to transmit the data by

monitoring the Internet traffic volume. By default, the RTCP port for video is set to 5557 and the RTCP

port for audio is set to 5559.

The ports can be changed to values between 1025 and 65535. The RTP port must be an even number

and the RTCP port is the RTP port number plus one, and thus is always an odd number. When the RTP

port changes, the RTCP port will change accordingly.

If the RTP ports are incorrectly assigned, the following warning message will be displayed:

Multicast settings for stream 1 ~ 5: Click the items to display the detailed configuration information.

Select the Always multicast option to enable multicast for stream 1 ~ 5.

Unicast video transmission delivers a stream through point-to-point transmission; multicast, on the other

hand, sends a stream to the multicast group address and allows multiple clients to acquire the stream at

the same time by requesting a copy from the multicast group address. Therefore, enabling multicast can

effectively save Internet bandwith.

The ports can be changed to values between 1025 and 65535. The multicast RTP port must be an even

number and the multicast RTCP port number is the multicast RTP port number plus one, and thus is

always odd. When the multicast RTP port changes, the multicast RTCP port will change accordingly.

If the multicast RTP video ports are incorrectly assigned, the following warning message will be

displayed:

Multicast TTL [1~255]: The multicast TTL (Time To Live) is the value that tells the router the range a

packet can be forwarded.

Содержание IK-WB80A




























































































































Результаты поиска

Содержание IK-WB80A

Отзывы:

Похожие инструкции для IK-WB80A

Бренды по названию

Популярные бренды

Toshiba IK-WB80A, Руководство пользователя

Результаты поиска

Содержание IK-WB80A

Отзывы:

Похожие инструкции для IK-WB80A

Бренды по названию

Популярные бренды