67
Click
Viewing Window
to open the viewing region settings page. On this page, you can set the
Region
of Interest
and the
Output Frame Size
for stream 1 ~ 3.
Please follow the steps below to set up those settings for a stream:
1. Select a stream which you want to set up the viewing region. If you want to stream out the video to a
mobile device, please select stream 3.
2. Select a
Region of Interest
from the drop-down list. The floating frame, the same as the one in the
Gloabl View window on the home page, will resize accordingly. If you want to set up a customized
viewing region,
you can also resize and drag the floating frame to a desired position with your mouse.
3. Choose a proper
Output Frame Size
from the drop-down list according to the size of your monitoring
device.
■ The parameters of the multiple streams:
■ The maximum
Region of Interest
of stream 3 is 1456 x 1200. You can also check the item "Set region
to full view" to extend the region to full view (1600 x 1200). However, the image will be distorted a little
bit.
When completed with the settings in the Viewing Window, click
Save
to enable the settings and click
Close
to exit the window. The selected
Output Frame Size
will immediately be applied to the
Frame
size
of each video stream as shown on the next page. Then you can go back to the home page to test
the e-PTZ function. For more information about the e-PTZ function, please refer to page 82.
Region of Interest
Output frame size
Stream 1
1600 X 1200 ~ 176 x 144 (Selectable)
1600 X 1200 ~ 176 x 144 (Selectable)
Stream 2
1600 X 1200 ~ 176 x 144 (Selectable)
1600 X 1200 ~ 176 x 144 (Selectable)
Stream 3
1456 x 1200 ~ 176 x 144 (Selectable)
176 x 144 (Fixed)
Stream 4
1600 X 1200 (Fixed)
1600 X 1200 (Fixed)
