background image

24

Changing V.SHAD. (Vertical Shading) correction mode

(5. 1) 

Move the “

aa

” to V.SHAD by pushing [MENU UP], [MENU DOWN] buttons.

Select the V.SHAD. mode setting by pushing [DATA UP], [DATA DOWN] buttons.

aa

Note: 

The alignment value for vertical shading is fixed to “0” when selecting V.SHAD. OFF.

MANU is not displayed in the menu.

Changing the manual V.SHAD. (Vertical Shading) correction setting

(5. 2) 

Move the “

aa

” to MANU by pushing [MENU UP], [MENU DOWN] buttons.

Adjust the MANU V.SHAD. by pushing [DATA UP], [DATA DOWN] buttons.

aa

Changing C.SHAD. (Corner Shading) correction mode

(5. 3) 

Move the “

aa

” to C.SHAD by pushing [MENU UP], [MENU DOWN] buttons.

Select the C.SHAD. mode setting by pushing [DATA UP], [DATA DOWN] buttons.

aa

Note: 

The alignment value for corner shading is fixed to “0” when selecting C.SHAD. OFF.

MANU is not displayed in the menu.

Changing the manual C.SHAD. (Corner Shading) correction setting

(5. 4) 

Changing the red size setting

(a) 

Move the “

aa

” to R SIZE by pushing [MENU UP], [MENU DOWN] buttons.

Adjust the R size by pushing [DATA UP], [DATA DOWN] buttons.

aa

Changing the red gain setting

(b) 

Move the “

aa

” to R GAIN by pushing [MENU UP], [MENU DOWN] buttons.

Adjust the R gain by pushing [DATA UP], [DATA DOWN] buttons.

aa

Changing red position setting

(c) 

Move the “

aa

” to R POSI by pushing [MENU UP], [MENU DOWN] buttons.

Adjust the R position by pushing [DATA UP], [DATA DOWN] buttons.

aa

Changing blue size setting

(d) 

Move the “

aa

” to B SIZE by pushing [MENU UP], [MENU DOWN] buttons.

Adjust the B size by pushing [DATA UP], [DATA DOWN] buttons.

aa

Changing blue gain setting

(e) 

Move the “

aa

” to B GAIN by pushing [MENU UP], [MENU DOWN] buttons.

Adjust the B gain by pushing [DATA UP], [DATA DOWN] buttons.

aa

Changing blue position setting

(f) 

Move the “

aa

” to B POSI by pushing [MENU UP], [MENU DOWN] buttons.

Adjust the B position by pushing [DATA UP], [DATA DOWN] buttons.

aa

120730c1_IK_TF7P2_EN.indd   24

12.7.30   1:19:03 PM

Содержание ik-tf7p2









































Отзывы: