5
1. CAUTIONS ON USE AND INSTALLATION
•
Carefully handle the units.
Do not drop, or give a strong shock or vibration to
the camera. This may cause problems. Treat the
camera cables carefully to prevent cable prob-
lems, such as cable breakdown and loosened con-
nections.
•
Do not shoot intense light.
If there is an intense light at a location on the
screen such as a spot light, a blooming and smear-
ing may occur. When intense light enters, vertical
stripes may appear on the screen. This is not a
malfunction. Ghosts may occur when there is an
intense light near the object. In this case, change
the shooting angle.
•
Install the camera in a location free from noise.
If the camera or the cables are located near power
utility lines or a TV, etc. undesirable noise may
appear on the screen. In such a case, try to change
the location of the camera or the cable wiring.
•
Moire
When thin stripe patterns are shot, stripe patterns
that are not actually there (moire) may appears
as interference stripes. This is not a malfunction.
•
Operating ambient temperature and humidity.
Do not use the camera in places where tempera-
ture and humidity exceed the specifications. Pic-
ture quality will lower and internal parts may be
damaged.
Be particularly careful when using in places ex-
posed to direct sunlight. When shooting in hot
places, depending on the conditions of the object
and the camera (for example when the gain is in-
creased), noise in the form of vertical strips or
white dots may occur. This is not a malfunction.
•
Handling of the protection cap.
Keep the protection cap away from children. Chil-
dren may put them into mouth or swallow them
accidentally. The protection cap protects the im-
age sensing plane when the lens is removed from
the camera, do not throw away.
•
When not using the camera for a longtime.
Stop supplying power.
•
When cleaning the camera.
Unplug the power source before cleaning. Clean
with a soft dry cloth only. Do not use benzine, al-
cohol, thinner, household detergents, chemically
treated cloths, etc. If used, coating and printed
letters may be discolored. When cleaning the lens,
use a lens cleaning paper, etc.
•
Avoid using or storing the camera in the fol-
lowing places:
Places filled with highly flammable gas.
Places near gasoline, benzene, or paint thinner.
Places subject to strong vibration.
Places contacting chemicals (such as pesticides),
rubber or vinyl products for a long period of time.
2. COMPONENTS
(1) Camera ........................................................................................................................................... 1
(2) Accessories
(a) Instruction manual ................................................................................................................... 1
