- 25 -
Charge begins to accumulate after the trigger input, and 1 field or 1 frame images are output. There are
three modes: 1PULSE SNR, 1PULSE SR and 2PULSE.
The RGB terminal trigger input and index output interface are as shown below.
Trigger input
INDEX out
CMOS out
1
1 PULSE SNR
1 Pulse Sync Non Reset
Charge begins to accumulate after the trigger input to the RGB terminal, and 1 field images are output.
(a) Rising edge / Falling edge mode
The exposure time is set to 0.02 ms to 16 ms on the menu.
Trigger pulse level
(Low Level)
Less than 0.5V , (High Level)
3.4V to 5V
RGB terminal
Trigger pulse fetch timing
Rising edge / Falling edge selectable
Trigger pulse width
More than 2
s
Trigger pulse interval
More than 50ms
INDEX
Exposure period
* Image output after 1 V
(Trigger pulse doesn’t
pass the VD falling.)
Video output
Approx. 1.9
s
Falling edge mode
TRIGGER
(RGB terminal)
VD output
Index output
Exposure period
Exposure period
Rising edge mode
* Image output after 2 V
(Trigger pulse pass the
VD falling.)
* Image output after 2 V
(Trigger pulse pass the
VD falling.)
A image is output at the first field
after the end of the exposure.
Approx. 1.9
s
Approx. 1.9
s
7
5 EXT TRIG (External trigger)
