Toshiba IK-SX1, Инструкция по эксплуатации

Страница: 5 / 24

5
1. CAUTIONS ON USE AND INSTALLATION
• Carefully handle the units.
Do not drop, or give a strong shock or
vibration to the camera. This may cause
problems. Treat the camera cables care-
fully to prevent cable problems, such as
cable breakdown and loosened connec-
tions.
• Do not shoot intense light.
If there is an intense light at a location
on the screen such as a spot light, a
blooming and smearing may occur.
When intense light enters, vertical stripes
may appear on the screen. This is not a
malfunction. Ghosts may occur when
there is an intense light near the object.
In this case, change the shooting angle.
• Install the camera in a location free from
noise.
If the camera or the cables are located near
power utility lines or a TV, etc. undesir-
able noise may appear on the screen. In
such a case, try to change the location of
the camera or the cable wiring.
• Moire
When thin stripe patterns are shooted,
stripe patterns that are not actually there
(moire) may appears as interference
stripes. This is not a malfunction.
• Operating ambient temperature and hu-
midity.
Do not use the camera in places where
temperature and humidity exceed the
specifications. Picture quality will lower
and internal parts may be damaged.
Be particularly careful when using in
places exposed to direct sunlight. When
shooting in hot places, depending on the
conditions of the object and the camera
(for example when the gain is increased),
noise in the form of vertical strips or
white dots may occur. This is not a mal-
function.
• Handling of the protection cap.
Keep the protection cap away from chil-
dren. Children may put them into mouth
or swallow them accidentally. The pro-
tection cap protects the image sensing
plane when the lens is removed from the
camera, do not throw away.
• When not using the camera for a long-
time.
Stop supplying power.
• When cleaning the camera
Always turn off the power and clean with
a piece of dry cloth. If necessary, gently
wipe with a cloth dampened with thinned
detergent. Do not use benzine, alcohol,
thinner, etc. If used, coating and printed
letters may be discolored. When cleaning
the lens, use a lens cleaning paper, etc.
2. COMPONENTS
(1) Camera ............................................................. 1
(2) Accessories
Instruction manual .......................................... 1