- 14 -
D/N MODE AUTO
D/N LEVEL LOW
SHUTTER IRIS
GAIN STD
SYNC INT
BLC OFF
SHARPNESS MID
WB
AUTO
<OPTION>
BACK
8-2-2. D/N LEVEL (DAY/NIGHT LEVEL)
Selections:
LOW (default): The chroma cut level is set less than
20 to 30 IRE.
MID:
The chroma cut level is set less than
30 to 40 IRE.
HIGH:
The chroma cut level is set less than
40 to 50 IRE.
Process:
1. Position the cursor ( ) next to CAMERA SETUP
and press the SELECT switch to access the
camera menu.
2. Position the cursor ( ) next to D/N LEVEL and
press the SELECT switch to access menu.
3. Use the buttons to select LOW, MID or HIGH.
4. Press the SELECT switch to accept the selection.
Note: The camera will switch to black and white
sooner at the high level than at the low level.
8-2-3. SHUTTER (Exposure time)
Selections:
AUTO(AES)
Exposure time is controlled automatically within a
range of 1/60 sec. to 1/100,000 sec. to obtain an
adequate signal.
1/60,1/100,1/250,1/500,1/1K, 1/2K, 1/4K, 1/10K, 1/
100K (MES).
When the rear panel switch is set to VIDEO or DC
the exposure time is fixed 1/60 sec. and shutter mode
turn to IRIS(default).
Process:
1. Set the Iris slide switch, located on the rear of the
camera, to the AES position.
2. Position the cursor ( ) next to CAMERA SETUP
and press the SELECT switch to access the
camera menu.
3. Position the cursor ( ) next to SHUTTER and press
the SELECT switch to access menu.
4. Use the buttons to choose the shutter speed
from AUTO through 1/100K.
5. Press the SELECT switch to accept the selection.
D/N MODE AUTO
D/N LEVEL LOW
SHUTTER IRIS
GAIN STD
SYNC INT
BLC OFF
SHARPNESS MID
WB
AUTO
<OPTION>
BACK
