Toshiba IDM5060, Руководство по установке

Страница: 27 / 58

RESET IPT TO DEFAULT Four Line Phones
IPT Installation Manual Feb,, 2015 1-15
RESET IPT TO DEFAULT This process resets the IPT to the default, new, ‘out of the box’ condition.
This resert to default process is only required when using a telephone that
has been configured or previously installed on another system.
The four line display phones use a different procedure than the nine line
(large) display phones.
Four Line Phones 1. Plug the IPT into a LAN or plug in a power adapter. The IPT does not
need a network connection for this initialization procedure, it only
needs power.
2. Ensure that the handset is ‘on-hook.’
3. Press
Hold
+
3
+
6
+
9
(simultaneously).
4. Press Vol
s
then press
Hold
.
5. Press FB1, FB2, FB3, FB4 .
6. Press
Hold
.
7. Press
Hold
.
8. Lift the handset then, place it back on-hook. The IPT will initialize then
start in default mode.
Nine Line Phones 1. Plug the IPT into a LAN or plug in a power adapter. The IPT does not
need a network connection for this initialization procedure, it only
needs power.
2. Ensure that the handset is ‘on-hook.’
3. Press
Hold
+
3
+
6
+
9
(simultaneously).
4. Press the INIT softkey.
5. Press the All Data softkey.
6. Press the EXEC softkey.
7. Press the EXEC softkey.
8. The IPT will initialize then start in default mode.