Toshiba ID EDGE, Описание

Страница: 73 / 142

Features
Credit Card Calling
IPedge General Description 01/12
59
conference can be released from another station by pressing the
Line
button of that sta-
tion. At this time, the station that released the Hold state becomes Conference Master. This
enables one person to establish a conference call for others.
Split/Join/Drop
This feature enables the conference master to add (Join) other phones to a conference. The
conference master and another member of the conference can leave (Split) the conference
for a private conversation. During this time, other conference members remain connected.
The conference master can then Join both of the Split callers back into the conference, or
the master can Drop (disconnect) the Split member he/she is connected to.
Releasing from Conference Tandem SIP Trunk Connections
This feature enables unattended line-to-line connections for the IP edge system, freeing the
conferencing station or voice mail port for other calls and important tasks. When a tandem
connection is set up with a DN button, the DN button will go idle after releasing from the
connection. The DN can then be used to make or receive calls from the originating tele-
phone.
Telephones and/or VM devices can establish tandem SIP trunk connections and then
release from them without disconnecting the tandem connection in the IP
edge system.
After releasing from a tandem call, reconnecting to the call can be accomplished by dial-
ing an access code.
Whether or not tandem line buttons appear on a telephone, the telephone user can enter the
connection and release the line that was connected to the original line or release both lines
by pressing the
Cancel
button.
Voice Mail Conference
Voice Mail ports may be included in conference calls. This enables all members of the
conference to listen to and play voice mail messages.
Credit Card Calling
Callers can make “0+” telephone credit card calls from selected toll restricted stations.
When dialing from toll restricted stations, if the caller does not enter a credit card number
after dialing “0,” the call will be disconnected.
Calls are billed to the credit card instead of the IP edge Net line. The “0+” credit card call-
ing feature can be enabled selectively or assigned to stations and CO lines capable of sup-
porting this service.