manualshive.com logo in svg

Toshiba GX9 ASD, Быстрый старт

Поделиться
Скачать
Toshiba GX9 ASD Скачать руководство пользователя страница 6

Important Notice

The instructions contained in this guide are not intended to cover all details or variations in equipment 
types, nor may it provide for every possible contingency concerning the installation, operations, or 
maintenance of this equipment. Should additional information be required, contact the Toshiba 
Customer Support Center.

The contents of this guide shall not become a part of or modify any prior or existing agreement, 
commitment, or relationship. The sales contract contains the entire obligation of Toshiba International 
Corporation. The warranty contained in the contract between the parties is the sole warranty of Toshiba 
International Corporation and any statements contained herein do not create new warranties or modify 
the existing warranty.

Any electrical or mechanical modifications to this equipment without the prior written consent of 
Toshiba International Corporation may void all warranties and may void the UL/CSA listing or 
other safety certifications. Unauthorized modifications may also result in a safety hazard or 
equipment damage.

Misuse of this equipment could result in injury and equipment damage. In no event will Toshiba 
International Corporation be responsible or liable for direct, indirect, special, or consequential 
damage or injury that may result from the misuse of this equipment.

Содержание GX9 ASD





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды