Toshiba GD-1221 страница 11 Скачать руководство пользователя | Manualshive

Страница: 11 / 82

background image

© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved

GD-1220/1221

SPECIFICATIONS AND OUTLINE OF SYSTEM

1 - 5

1

1.3

Features

• High-speed scanning

The GD-1220/1221 scan one Letter (A4) size Original page in 1.4 seconds (line density 8 dots/mm x
3.85 lines/mm) and stores it into memory.

• High-speed transmission

The GD-1220/1221 uses a V.34 modem designed for 33,600 bps communications.

• Multi-access

Using the multi-access facility, multiple processes can be performed in parallel. Functions, such as
transmission reservation during reception, copying during memory transmission/ reception, etc.
Maximizing the GD-1220/1221’s high-speed scanning and multi-access capabilities provides maxi-
mum office productivity and efficiency. Patterns of the multi-access are as follows:
- Scan to Memory during Memory Transmission
- Scan to Memory during Reception
- Scan to Memory during Substitute Reception
- Copying during Memory Transmission
- Reception during Copying
- Reception during Memory printing
- Reception during List printing
- Scan to Memory during Memory printing
- Scan to Memory during List printing

• Laser recording on plain paper

Recording is performed on fixed sizes of paper - Ledger, Legal, Letter, Letter-R, Statement, State-
ment-R, Computer, A4, A4-R (to NAD model) or A3, A4, A4-R, A5-R, B4, FOLIO, Letter, Letter-R (to
MJD/AUD/ASD/SAD/TWD/CND models) - using a laser beam printer.

• Halftone system

Photographic images are clearly recorded by the 256 grayscales using the error diffusion method.

• High resolution mode

The GD-1220/1221 can transmit in ultra-fine mode (406 x 392).

• Image memory communication function

Picture data can be stored in the image memory. For a delayed transmission, the picture data cre-
ated by scanning Originals is stored in the image memory and to be transmitted at the designated
time.
Other memory functions include multi-address transmission, substitute reception, ECM communica-
tion, etc.
The memory contents will be retained by a backup battery for up to 2 hours if a power failure occurs.
The memory size is 5.7 MB.

• 75 one touch keys

The remote party’s address data can be registered to a one touch key. Communication options can
be registered for each address. Some one touch keys also operate as direct function access keys.

• 300 abbreviated dial numbers

300 abbreviated dial numbers can be assigned in the range from No. 001 to 999.

08/08

«
...
9
10
11
12
13
...
»

Содержание GD-1221



















































































Отзывы:

Нет отзывов

Похожие инструкции для GD-1221

Бренд: Oki Страницы: 2

Бренд: Dascom Страницы: 12

Бренд: Dascom Страницы: 19

Бренд: Dascom Страницы: 5

Бренд: Panduit Страницы: 74

Бренд: Tally Страницы: 2

Бренд: Tally Dascom Страницы: 57

Бренд: Fenix Страницы: 65

M-Class Mark II

Бренд: Datamax Страницы: 94

Бренд: Canon Страницы: 4

Бренд: Copystar Страницы: 4

Бренд: A&D Страницы: 16

Бренд: Tally Страницы: 266

Бренд: Kyocera Mita Страницы: 14

Бренд: Oki Страницы: 56

Бренд: Oki Страницы: 78

Бренд: Xerox Страницы: 78

DocuPrint 4635 IPS Series

Бренд: Xerox Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды