Toshiba GD-1151 Скачать руководство пользователя страница 37

Страница: 37 / 190

Setting the scanning conditions for each page

When you want to send multi-page originals by placing them on the original glass, you can change the fol-
lowing scanning conditions for each page:

Resolution Exposure
Original mode

Original size

This function is convenient for newspapers and books can be placed on the original glass and sent.

Place the original on the glass.

•

P.26 “When setting originals on the glass”

Press the [FAX] button on the control panel.

Press the [OPTION] button and set the transmission conditions.
And press the [ENTER] button to complete the setting.

•

P.29 “4.Setting the Transmission Conditions”

Specify the remote Fax.

• Specifying by digital keys (

P.37 “Direct entry with digital keys”)

• Specifying by address book (

P.38 “Address book entry”)

• Specifying by group (

P.39 “Group entry”)

• Specifying by multi-address transmission (

P.47 “Multi-address transmission”)

Press the [START] button.

• The first original is scanned.

Place the next original.

Select the [OPTION] button and set the transmission conditions for
the second original as required.
And press the [ENTER] button to complete the setting.

• The changeable scanning conditions for each page are the “RESOLUTION”, “MODE”, “EXPOSURE” and

“ORIGINAL”.

Содержание GD-1151































































































































































































Результаты поиска

Содержание GD-1151

Отзывы:

Toshiba GD-1151, Руководство оператора, Страница: 37 / 190

Результаты поиска

Содержание GD-1151

Отзывы: