Toshiba ES9455 MFP, Руководство по копированию, Страница: 60 / 208

3 BASIC COPY MODES
58 Paper Selection
Paper Selection
„
Automatic Paper Selection (APS)
This equipment detects the size of an original and selects paper of the same size automatically. This function is called
Automatic Paper Selection (APS). Automatic size detection for originals on the original glass is available only for ES9455
MFP / ES9475 MFP Series.
y For the original sizes detectable, see the following page:
P.27 “Acceptable originals”
y Some original sizes may not be detected with this function. In this case, select the desired size manually.
P.59 “Selecting desired paper manually”
1
Place paper in the tray(s).
2
Place the original(s).
3
Press [APS] on the touch panel.
The paper selection mode is now set at Automatic Paper Selection.
y
The paper selection mode is set at Automatic Paper Selection by default.
y Even if the direction of the paper placed in the selected tray differs from that of the original, this equipment
rotates the data of the original by 90 degrees to make copies as long as their sizes are the same. (This
works on A4, B5 or LT paper only.) For example, when an A4 original is placed in a portrait direction and A4-
R paper is placed in the tray, the data of the A4 original will be rotated and copied correctly on A4-R paper.
If “Change direction of original” or “CHANGE TRAY TO CORRECT PAPER SIZE” appears, follow the
directions.
4
Select other copy modes as required, and then press the [START] button on the control
panel.