Toshiba eS305CP Скачать руководство пользователя

Страница: 157 / 220

Complex page, some data may not have printed [39]

Try one or more of the following:

•

From the printer control panel, select

Continue

to ignore the message and continue printing. For non

‑

touch

‑

screen

printer models, press

to confirm.

•

Cancel the current print job. For non

‑

touch

‑

screen printer models, press

to confirm.

•

Install additional printer memory.

Configuration change, some held jobs were not restored [57]

Held jobs are invalidated because of any of the following possible changes in the printer:

•

The printer firmware has been updated.

•

The tray for the print job is removed.

•

The print job is sent from a flash drive that is no longer attached to the USB port.

•

The printer hard disk contains print jobs that were stored when the hard disk was installed in a different printer
model.

From the printer control panel, select

Continue

to clear the message. For non-touch-screen printer models, press

to confirm.

Defective flash detected [51]

Try one or more of the following:

•

Replace the defective flash memory card.

•

From the printer control panel, select

Continue

to ignore the message and continue printing. For non

‑

touch

‑

screen

printer models, press

to confirm.

•

Cancel the current print job.

Error reading USB drive. Remove USB.

An unsupported USB device is inserted. Remove the USB device, and then insert a supported one.

Error reading USB hub. Remove hub.

An unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one.

Incompatible tray [x] [59]

Remove, and then reinstall the indicated tray to clear the message.

Troubleshooting

157

Содержание eS305CP





























































































































































































































Результаты поиска

Содержание eS305CP

Отзывы:

Похожие инструкции для eS305CP

Бренды по названию

Популярные бренды

Toshiba eS305CP, Руководство пользователя

Результаты поиска

Содержание eS305CP

Отзывы:

Похожие инструкции для eS305CP

Бренды по названию

Популярные бренды