Toshiba e-Studio477s Скачать руководство пользователя страница 97

Страница: 97 / 264

USEFUL FUNCTIONS

- 97 -

Refining your search

Click the pull-up menu, and then select
letters that you want to display.

1) Click the pull-up menu.
2) Select letters that you want to display.

Addresses with the selected letter(s) first are displayed.

Press

for the desired contacts. For

Scan to E-mail, press [OK] at the end.

Note

• Before pressing [OK], you can specify additional e-mail

addresses.

• If you want to view or delete the specified e-mail

addresses, press [DESTINATION].



P.102 "Viewing/Deleting specified e-mail
addresses"

Searching the address book with ID numbers

Press [KNOWN ID].

Using the digital keys, enter the ID number
for the desired contact and then press [OK].

The page containing the contact of the specified ID
number is displayed.

Press

for the desired contacts. For

Scan to E-mail, press [OK] at the end.

Memo

• Before pressing [OK], you can specify additional e-mail

addresses.

• If you want to view or delete the specified e-mail

addresses, press [DESTINATION].



P.102 "Viewing/Deleting specified e-mail
addresses"

Searching the address book with search strings

Press [SEARCH].

The SEARCH screen appears.

Содержание e-Studio477s








































































































































































































































































Результаты поиска

Содержание e-Studio477s

Отзывы:

Toshiba e-Studio477s, Руководство для продвинутых пользователей, Страница: 97 / 264

Результаты поиска

Содержание e-Studio477s

Отзывы: