manualshive.com logo in svg

Toshiba e-studio4520C, Руководство по управлению

Поделиться
Скачать
Toshiba e-studio4520C Скачать руководство пользователя страница 76

2 SETTING ITEMS (ADMIN)

74    Setting General Functions

3

Make settings for the weekly timer.

1) Press the desired day of the week button.
2) Press [ON] to enter the time that the device automatically turns on the power.

Use the arrow buttons to move the cursor and enter “Hour” and “Minute”.

3) Press [OFF] to enter the time that the device automatically turns off the power.

Use the arrow buttons to move the cursor and enter “Hour”  and “Minute”.

4) Press [OK] to save the setting.

y

If you want to clear entered time to retype it, press the [CLEAR] button on the control panel.

y

If you want to disable the weekly timer function, enter the same time in both [ON] and [OFF] boxes.
Entering “00:00” for the ON time and “24:00” for the OFF time will also disable its function.

Setting the auto power save mode

1

Press [AUTO POWER SAVE].

The AUTO POWER SAVE screen is displayed.

2

Press the desired period of time (in minutes) that this equipment waits before the auto 
power save mode is activated.

The auto power save mode setting is completed.

Содержание e-studio4520C















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды