Toshiba e-Studio332s Скачать руководство пользователя страница 157

Страница: 157 / 183

Other Issues

- 157 -

oubleshooting

Image Quality Issues

Memo

If the following information does not solve your trouble, contact your dealer.

Symptom

Point to check

Remedy

Reference

Vertical white lines

appear.

The LED heads are dirty.

Wipe the LED heads with a soft

tissue paper.

P.170

The toner is low.

Replace the toner cartridge.

P.165

Foreign material may be present

on the image drum.

Replace the image drum.

P.166

The image drum is not installed

properly.

Install the image drum properly.

P.166

The ADF document glass is dirty.

Clean the ADF document glass.

P.168

Printed images are

fading vertically.

The LED heads are dirty.

Wipe the LED heads with soft

tissue paper.

P.170

The toner is low.

Replace the toner cartridge.

P.165

The paper is unsuitable.

Use supported paper.

Printed images are light. The toner cartridge is not installed

properly.

Install the toner cartridge properly.

P.165

The toner is low.

Replace the toner cartridge.

P.165

The paper is moist.

Use paper stored under proper

temperature and humidity

conditions.

P.35

The paper is unsuitable.

Use supported paper.

The paper is unsuitable.

The settings of media type and

width are incorrect.

Press the <

SETTING

> key and

select [

Paper Setup

] > the paper

tray you are using, and then select

the proper values for [

Media

Type

] and [

Media Weight

]. Or,

select the thicker values for

[

Media Weight

P.40

The paper is recycled.

Press the <

SETTING

> key and

select [

Paper Setup

] > the paper

tray you are using, and then select

the thicker values for [

Media

Weight

P.40

Yellow and green are used in the

original document.

If the original data was

transmitted, ask the sender to

change the color of the original

document to black and white.

Printed images are

partially faded. White

spots and lines appear.

The paper is too moist or dry.

Use paper stored under proper

temperature and humidity

conditions.

P.35

Vertical lines appear.

The image drum is damaged.

Replace the image drum.

P.166

The toner is low.

Replace the toner cartridge.

P.165

The document glass and paper

feed roller of the ADF are dirty.

Clean the document glass and

paper feed roller.

P.168

Содержание e-Studio332s























































































































































































Результаты поиска

Содержание e-Studio332s

Отзывы:

Похожие инструкции для e-Studio332s

Бренды по названию

Популярные бренды

Toshiba e-Studio332s, Руководство оператора

Результаты поиска

Содержание e-Studio332s

Отзывы:

Похожие инструкции для e-Studio332s

Бренды по названию

Популярные бренды