manualshive.com logo in svg

Toshiba e-STUDIO287CS, Руководство пользователя, Страница: 69 / 368

Поделиться
Скачать
Toshiba e-STUDIO287CS Скачать руководство пользователя страница 69

2

1

3

4

5

6

7

PRINTING FROM UNIX/Linux

- 69 -

●

PRINTING FROM UNIX/Linux

Printing From Application

This section describes how to print from a UNIX/Linux 
workstation.

Note

• When the User Management setting is enabled, a print job 

sent from UNIX/Linux workstations is processed as an 
invalid job according to the User Authentication 
Enforcement setting. For more information about the User 
Authentication Enforcement setting, refer to the 

TopAccess 

Guide

.

• Before attempting to print from a UNIX/Linux workstation, 

make sure all the UNIX/Linux Filters are installed in your 
workstation.

Memo

• For instructions on how to install or set CUPS, refer to the 

Software Installation Guide

.

Considerations and limitations

• This equipment acts only as a filter and not as a complete 

driver. The size and order of the printed pages cannot be 
modified.

• The UNIX/Linux filters do not support the following engine-

supplied features:

-

Enlarge/Reduce printing

-

Rotate Sort

-

N-up printing

-

Watermarks

-

Cover Sheets

-

Sheet Insertion

-

Scheduled Print

-

Print to Overlay File

-

Store to e-Filing

-

Use Overlay Image

• Linux uses the lptap command to send a file to this 

equipment.
Since lp is not supported in all versions of Linux, the lptap 
command should be used instead.

• AIX supports printing using the qdaemon. This can be 

invoked by the user with the commands lp, lpr or qprt. In 
order to use the filter, either lp or qprt should be used.

Printing using lp command

Use the lp command (lptap in Linux) to send a file to this 
equipment for printing. This command specifies various printer-
specific options using the -o option parameter on the command 
line. The lp command also sets other print options using 
various other parameters. Use the “man net_estcolor” 
command to display the online document that describes the 
various options and parameters that can be set to configure 
printed output.
All the options are sent to this equipment at the start of a print 
job so, if the print file contains its own commands, they may 
override the lp options.

Generic “lp” and “lptap” options

How to print files

Enter the following “Ip” command to print files with the 
specified printer:
lp -d <queuename> <filename>

Copies

The number of copies of a print job is specified using the “-n 
<value>” parameter with the “lp” command. The default value 
is determined by the “lp” command and it is always 1. The 
copies are always collated.

Title

The title that is printed on the banner page can be specified 
using the “-t <title>” parameter with the “lp” command. The 
default value is determined by the “lp” command and it is often 
the name of the print file. If multiple files are printed using the 
same “lp” command the default title is set to the name of the 
first file by the “lp” command.

General options

The options below are applied to all print jobs that this 
equipment handles.

Note

• Option commands are case sensitive and must be entered 

exactly as shown.

• Some printing functions may be disabled depending on the 

combinations of option commands because priority is given 
to the specifications of this equipment over option 
commands.

Содержание e-STUDIO287CS

















































































































































































































































































































































































Отзывы:

Нет отзывов