Toshiba e-studio281c Скачать руководство пользователя страница 296

Страница: 296 / 678

e-STUDIO281c/351c/451c

ADJUSTMENT

3 - 30

3.5.5

Gamma balance adjustment

The density adjustment at the Black Mode is performed by selecting its density area from the following:
low density, medium density and high density.

Make a test copy and compare the image obtained with the current settings; if necessary, make adjust-
ment using the following procedure.

Note:

Be sure that this adjustment be made after performing “3.5.1 Automatic gamma adjustment”.

<Procedure>
Procedure is same as that of “3.5.4 Color balance adjustment”.

3.5.6

Offsetting adjustment for background processing

The density of background and text can be adjusted as follows.

Make a test copy and compare the image obtained with the current settings; if necessary, make adjust-
ment using the following procedure.

<Procedure>
Procedure is same as that of "3.5.2 Density adjustment".

Color
mode

Original mode

Item to be adjusted

Remarks

Text/Photo

Text

Photo

Black

590-0

591-0

592-0

Low density

The larger the value is, the

density of the item to be

adjusted becomes darker.

Acceptable values:

0 to 255. (Default: 128)

590-1

591-1

592-1

Medium density

590-2

591-2

592-2

High density

Color
mode

Original mode

Item to be adjusted

Remarks

Text/

Photo

Text

Printed

Image

Photo

Map

Full

Color

1688

1689

1690

1691

1692

Automatic density

adjustment for back-

ground

The larger the value is, the

darker the background

becomes. (Automatic)

Acceptable values:

0 to 255.

(Default: 128)

1693

1694

1695

1696

1697

Automatic density

adjustment for text

The larger the value is, the

darker the text becomes.

(Automatic)

Acceptable values:

0 to 255. (Default: 128)

1698

1699

1700

1701

1702

Manual density

adjustment for back-

ground

The larger the value is, the

darker the background

becomes. (Manual)

Acceptable values:

0 to 255. (Default: 128)

1708

1709

1710

1711

1712

Manual density

adjustment for text

The larger the value is, the

darker the text becomes.

(Manual)

Acceptable values:

0 to 255. (Default: 128)

Содержание e-studio281c


































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание e-studio281c

Отзывы:

Toshiba e-studio281c, Руководство по обслуживанию, Страница: 296 / 678

Результаты поиска

Содержание e-studio281c

Отзывы: