Toshiba e-STUDIO222CP, Руководство пользователя

Страница: 33 / 75

Menu functions > 33
PPR
EMULATION
This menu controls settings effective when the printer is operating in PPR emulation mode.
PEN WIDTH ADJUST ON/OFF When minimum width is specified in PCL, sometimes a
1-dot line, looks broken.
With PEN WIDTH Adjust set to ON, when the minimum
width is specified, the line width will be emphasized so
as to look wider than a 1-dot line.
With PEN WIDTH Adjust set to OFF, the line will appear
as before.
TRAY ID#
MP TRAY 1 ~ 4 ~ 59 Sets the # to specify the MP tray for the paper feed
destination command (ESC&l#H) in PCL5e emulation.
TRAY 2 1 ~ 5 ~ 59 Sets the # to specify Tray 2 for the paper feed
destination command (ESC&l#H) in PCL5e emulation.
(Displayed only if Tray 2 is installed).
ITEM SETTINGS EXPLANATION
CHARACTER PITCH 10 CPI; 12 CPI;
17 CPI; 20 CPI;
PROPORTIONAL Specifies character pitch in IBM PPR emulation.
FONT CONDENSE 12CPI TO 20CPI
12CPI TO 12CPI Specifies 12CPI pitch for Condense Mode.
CHARACTER SET SET-1
SET-2 Specifies a character set.
SYMBOL SET IBM - 437
(Default Symbol Set
only shown)
Specifies a symbol set.
LETTER 0 STYLE DISABLE
ENABLE Specifies the style that replaces 9BH with letter o and
9DH with a zero
ZERO CHARACTER NORMAL
SLASHED Sets the zero to be slashed or unslashed.
LINE PITCH 6 LPI; 8 LPI Specifies the line spacing.
WHITE PAGE SKIP OFF / ON Selects whether blank pages are printed or not.
CR FUNCTION CR / CR+LF Selects whether a received carriage return character
(0Dh) also causes a line feed.
LF FUNCTION LF / LF+CR Selects whether a received line feed character (0Ah)
also causes a carriage return.
LINE LENGTH 80 COLUMN; 136
COLUMN Specifies the number of characters per line.
FORM LENGTH 11 INCH
11.7 INCH
12 INCH Specifies the length of paper.
TOF POSITION 0.0INCH ~ 1.0INCH Specifies the distance of print from the top edge of the
paper.
LEFT MARGIN 0.0INCH ~ 1.0INCH Specifies the distance of print from the left hand edge
of the paper.
ITEMS SETTINGS EXPLANATION