Toshiba e-STUDIO2010AC, Руководство по визуализации

Страница: 142 / 340

2.Copier-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
2-88
2.20 To Copy While Erasing Shadow Outside of Image
 Explanation
When originals such as books are copied, an area outside of the image is copied like a shadow because
the original cover is not fully closed. Use the Outside Erase function to avoid copying areas outside of the
image.
 Procedures
Both the service technician and the user can perform all the steps of this adjustment.
(1) Press [Edit] tab on the Cop and then press [Outside Erase]. Change the border between the original
and areas not belonging to the original by pressing either [+] or [-] as required.
• When you adjust it to [+] side, the area to be detected as that not belonging to the original is
widened. When you adjust it to [-] side, the area to be detected as that not belonging to the
original is narrowed.
<Notes>
The Outside Erase function may not be operated correctly under the following conditions:
• When making copies in a bright room, leaving the DF or the Platen Cover opened (The density of
areas not belonging to the original is lowered due to outside light.)
• When the original has extremely dark areas (The extremely dark areas are wrongly detected as
areas not belonging to the original and thus erased.)
• In case of special originals (e.g. a three-dimensional object, an original with black edges, the
edges of an opened book)
Before adjustment After adjustment
When originals such as books are copied,
an area outside of the image is copied like
a shadow because the original cover is not
fully closed.
The shadow is erased.