manualshive.com logo in svg

Toshiba e-studio1105, Руководство по эксплуатации, Страница: 87 / 396

Поделиться
Скачать
Toshiba e-studio1105 Скачать руководство пользователя страница 87

Tray 6 (with the optional Large Capacity Tray)

Paper Size

You can select the size of the paper loaded in the optional large capacity tray (LCT).
This menu appears only when the LCT is installed.
The paper sizes you can set for Tray 6 (with the optional LCT) is as follows:
8

1

/

2

×11

You can load only 8

1

/

2

 × 11 size paper on this tray. To change the paper size, additional setup is

required. For details, contact your service representative.

Paper Type

You can set the display so you can see what type of paper is loaded in the paper tray.
The print function uses this information to automatically select the paper tray.
The paper types you can set for the Paper Tray 6 (with the optional LCT) are as follows:
[Do not Display], [Recycled Paper], [Special Paper], [Color Paper 1], [Color Paper 2], [Yellow],
[Green], [Blue], [Purple], [Ivory], [Orange], [Pink], [Red], [Gray], [Letterhead], [Translucent Paper],
[Preprinted Paper], [Bond Paper], [Cardstock], [OHP (Transparency)], [Prepunched Paper]

Paper Thickness

The paper thicknesses you can set for Tray 6 (with the optional LCT) are as follows:

• Plain Paper

52 - 105 g/m

2

 (14 - 28 lb BOND)

• Middle Thick

106 - 163 g/m

2

 (28 lb BOND - 90 lb INDEX)

The default setting for "Paper Type" is Do not Display.
The default setting for "Paper Thickness" is Plain Paper.
The default setting for "Apply Duplex" is Yes.
The default setting for "Apply Auto Paper Select" is Yes.
The key mark is displayed next to the paper tray if [No] is selected in "Apply Auto Paper Select".
For details about the relations between possible paper sizes and thickness, see "Recommended Paper
Sizes and Types", About This Machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This
Machine.

Designation Sheet 1 - 9

You can specify and display the paper tray to set designation sheets. You can also specify the display
time and copying method for two sided copying.

• Select Designation Sheet from 1-9

Items of Tray Paper Settings

85

2

Содержание e-studio1105













































































































































































































































































































































































































Отзывы:

Нет отзывов