manualshive.com logo in svg

Toshiba e-studio1105, Руководство по эксплуатации, Страница: 356 / 396

Поделиться
Скачать
Toshiba e-studio1105 Скачать руководство пользователя страница 356

When Using Windows Terminal Service/Citrix

Presentation Server/Citrix XenApp

The following explains how to use Windows Terminal Service and Maintenance.

Operating Environment

The following operating systems and Citrix Presentation Server/Citrix XenApp versions are supported.

Windows 2000 Server / Advanced Server

• Citrix Presentation Server 4.0
• Citrix XenApp 4.5

Windows Server 2003/2003 R2/2008

• Citrix Presentation Server 4.0
• Citrix XenApp 4.5

Supported Printer Drivers

When Windows Terminal Service is operating

• PCL drivers
• PostScript 3
• RPCS drivers

• Some RPCS printer driver functions do not work if Windows Terminal Service is installed.

Limitations

The following limitations apply to the Windows Terminal Service environment.
These limitations are built in Windows Terminal Service or Citrix Presentation Server/Citrix XenApp.

Windows Terminal Service

In the Windows Terminal Service environment, some of the printer driver's functions are unavailable.
In an environment where Windows Terminal Service is installed, some of the printer driver's functions
are available, even if any function of Windows Terminal Service is not used. When you install
SmartDeviceMonitor for Client in an environment where the Terminal Service is running on the
Windows 2000 Server family computer, be sure to install it using the install mode. The following are
the two methods of installation using the install mode:

8. Appendix

354

8

Содержание e-studio1105













































































































































































































































































































































































































Отзывы:

Нет отзывов