Toshiba e-studio1105 Скачать руководство пользователя страница 260

Страница: 260 / 396

Authentication Information

Following describes the procedure for authenticating a user code.

• The functions associated with each user code are the same. If you change or delete user codes,

management data and limits associated with that code become invalid.

• Copier
• Document Server
• Printer
• Scanner

• You can register up to 500 user codes.
• The number of copies scanned using the scanner function is counted for each user code. This allows

you to check each user's usage.

• To automatically register the printer driver user code, select [PC Control] under Printer for the printer

in User Code Authentication. To use the user code set in User Tools, set the user codes registered in
User Tools for the printer driver.

• For details about setting user codes for the printer driver, see the printer driver Help.

• p.258 "Authentication Information"

Registering an User Code

This section describes how to register a user code.

Press the [User Tools] key.

6. Registering Addresses and Users for Scanner Functions

258

Содержание e-studio1105












































































































































































































































































































































































































Результаты поиска

Содержание e-studio1105

Отзывы:

Toshiba e-studio1105, Руководство по эксплуатации, Страница: 260 / 396

Результаты поиска

Содержание e-studio1105

Отзывы: