manualshive.com logo in svg

Toshiba e-studio1105, Руководство по эксплуатации, Страница: 205 / 396

Поделиться
Скачать
Toshiba e-studio1105 Скачать руководство пользователя страница 205

View settings

msh> sntp

NTP IPv4 server address configuration

You can specify the IPv4 address of the NTP server.

msh> sntp server "IPv4_address"

NTP hostname configuration

You can specify the hostname of the NTP server.

msh> sntp server "hostname"

Deleting NTP server configuration

msh> sntp server clear

Interval configuration

msh> sntp interval "polling_time"

• You can specify the interval at which the printer synchronizes with the operator-specified NTP

server. The default is 60 minutes.

• The interval can be entered from 0, or between 15 and 10,080 minutes.
• If you set 0, the printer synchronizes with the NTP server only when you turn the printer on. After

that, the printer does not synchronize with the NTP server.

Time-zone configuration

msh> sntp timezone "±hour_time"

• You can specify the time difference between the printer clock and NTP server clock. The values

are between -12:00 and +13:00.

• You can only select either the address or host name for the ntp server.

spoolsw

Use the "spoolsw" command to view and configure Job Spool settings.
You can only specify diprint, trap, lpr, ipp, ftp, sftp, wsd (printer), and smb (TCP/IP) protocol.

• The "spoolsw" command for configuring Job Spool settings is available only when the optional hard

disk is installed.

View settings

The Job Spool setting appears.

msh> spoolsw

Remote Maintenance by telnet

203

5

Содержание e-studio1105













































































































































































































































































































































































































Отзывы:

Нет отзывов