manualshive.com logo in svg

Toshiba e-studio 5560c, Руководство по копированию, Страница: 22 / 188

Поделиться
Скачать
Toshiba e-studio 5560c Скачать руководство пользователя страница 22

1 BEFORE USING EQUIPMENT

20    Placing Paper

„

Placing paper in the Tandem Large Capacity Feeder

This operation is applied only to the Tandem Large Capacity Feeder type.

y

Paper in the right-hand tray is used first. When it runs out, paper in the left-hand tray will be moved 
automatically to the right-hand tray and fed.

y

A maximum of 2360 sheets (80 g/m

2

) (20 lb. Bond) can be placed in the 2 trays. However the stack height 

of the paper must not exceed the line indicated inside the side guides.

 

 P.11 “Acceptable copy paper”

y

The copy side may be noted on its wrapping paper.

y

Be careful not to cut your fingers when fanning the paper.

y

When placing paper, be sure that the center lever is not open. (See the label attached in the Tandem Large 
Capacity Feeder.)

3

Push the drawer of the Tandem Large Capacity Feeder straight into this equipment 
carefully.

When the drawer is completely inserted, the right-hand tray will move up to the paper feeding position.

Do not slam the drawer shut. Stacked sheets may collapse and they cannot be transported correctly.

Be careful not to let your fingers be caught when pushing the drawer into this equipment. 

This could injure you.

4

Change the paper type as required.

 

 P.17 “Setting paper type”

1

Pull out the drawer of the Tandem Large Capacity 
Feeder carefully until it comes to a stop.

Do not touch the slide rail (“A” in the figure on the right).

This could injure you.

2

Place 2 stacks of paper in the right and left trays 
correspondingly.

Fan and jog the paper well before placing it. Place it with its copy side 
up. Place one stack of paper in the right-hand tray (shown as “A” in the 
figure) with its side touching the right corner of the tray, and place the 
other stack of paper in the left-hand tray (shown as “B” in the figure) 
with its side touching the left corner of the tray. Paper can be placed 
neatly if you divide stacks into small bundles and pile them up on the 
two trays alternately.

A

A

B

Содержание e-studio 5560c





























































































































































































Отзывы:

Нет отзывов