Toshiba e-STUDIO 407CS Series, Руководство по печати

Страница: 46 / 204

2 PRINTING FROM WINDOWS
44 Setting Up Print Options
2) Use Back Cover
This sets back cover printing which allows you to insert or print a back cover on a sheet fed from a different drawer or
bypass tray other than the Paper Source option selected on the [Basic] tab.
To enable back cover printing, select the check box and select the location from where a back cover sheet is to be fed
and the print style to be used.
For detailed instructions on how to print with the [Use Back Cover] setting, see the following page:
 P.100 “Inserting different types of paper”
Source
Select the location from where a back cover sheet is to be fed. When [Auto] is selected, the paper is automatically
selected according to the printed document size.
The selectable values in the [Source] box vary depending on the optional devices installed in this equipment and
their configuration on the [Device Settings] tab.
Print Style
This selects how you want to print a back cover.
- Do not print on page — Select this to insert a blank cover.
- Print one side of the page — Select this to print the last page image on the front side of a cover.
- Print both sides of page — Select this to print the last two page images on both sides of a cover. This is available
only when the 2-Sided Printing option is enabled on the [Finishing] tab.
 If [Print one side of the page] is selected while 2-Sided Printing is performed, the last page is printed on the
front side of the cover sheet and back side of the cover will be blank.

If [Print both sides of page] is selected but there is only one page printed on the back cover, the last page is
printed on the front side of the cover sheet and back side of the cover will be blank.
3) Insert Pages
This sets sheet insertion printing which allows you to insert a sheet between pages, or print a specific page on a sheet
fed from a tray other than the Paper Source option selected on the [Basic] tab.
This option is useful when you want to insert a blank sheet between chapters, or when you want to print chapter cover
pages on the different paper.
To enable sheet insertion printing, select the check box and click [Edit] to set how the pages are inserted in the [Insert
Pages] dialog box.

P.46 “Insert Pages”
 This option cannot be set when the [Interleave Pages] option is enabled.
 Up to 50 pages can be inserted.
For detailed instructions on how to print with the [Insert Pages] setting, see the following page:
 P.100 “Inserting different types of paper”
4) Interleave Pages
This sets the interleaving page feature that is useful when you want to insert paper of a different type (or from another
source) between every page of your print job. For example, you can use this option to insert blank, colored sheets
between overhead transparencies.
To enable interleaving pages, select the check box and select the location from where sheets are to be fed.
 When this option is enabled as well as the [Use Front Cover] and [Use Back Cover] options enabled, no page is
inserted after the front cover and back cover.

This option cannot be set when [Insert Pages] option is enabled.