manualshive.com logo in svg

Toshiba e-studio 35, Руководство оператора

Поделиться
Скачать
Toshiba e-studio 35 Скачать руководство пользователя страница 179

C

C-5

Troubleshooting

Mac OS users may fail to see the GA-1040 if a network administrator has assigned it to 
a different zone, or has added zones where previously there were none. 

If you have configured the GA-1040 and set up client computers and network servers 
according to guidelines in the Configuration Guide and Getting Started, try printing a 
Test Page (at the Command WorkStation, choose Print Pages from the File menu).

If you are able to print the test page but still can’t print a file from a remote computer, 
contact the system administrator to troubleshoot the network connection. 

If you are unable to connect to the GA-1040, and you cannot print the Test Page, 
check the GA-1040’s touch panel display.

Setup error messages

For information on Setup error messages, see the Configuration Guide.

If this happens:

Try this:

The display is completely 
blank.

Check the copier’s Standby function. If the copier is in 
Standby mode, press the Standby key to see any messages on 
the display.

The copier is not in 
Standby mode.

The copier’s Automatic Power-Off function may have shut 
down the copier. 
Turn the copier on, and then try printing a Test Page again 
when the copier has warmed up.

You still cannot print a 
Test Page.

Make a copy. If you can make a copy, restart the GA-1040, 
and when you see Online, try printing a Test Page again. If 
the Test Page still fails to print, contact your authorized 
service/support center.

Содержание e-studio 35































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды