Toshiba e-STUDIO 257 Скачать руководство пользователя страница 89

Страница: 89 / 172

3 BASIC COPY MODES

Performing Copy & File 87

Performing Copy & File

With the Copy & File function, you can store the copied data in the share folder of the hard disk of this

equipment or a specified PC on a network. The data can be stored in any of PDF, TIFF and XPS formats.



The “COPY & FILE” function is available only when the Scanner Kit or Printer/Scanner Kit (both

optional) is installed.



The data will be stored as black images. (Resolution: 600 dpi only) The data stored with this function

are suited for printing but not for being imported as an image into your PC. To obtain the optimal image

quality for importing, it is recommended to store the data with the Scan to File function of this

equipment.



The network administrator must make settings for Copy & File in advance. For details, refer to the

TopAccess Guide



It is recommended to back up the data stored in the share folder.

You can store data in an e-Filing box with the Store to e-Filing function. For details, refer to the

e-Filing

Guide

Place the original(s).

Press [STORAGE] on the touch panel.

Press [COPY & FILE] on the touch panel.

Содержание e-STUDIO 257











































































































































































Результаты поиска

Содержание e-STUDIO 257

Отзывы:

Toshiba e-STUDIO 257, Руководство по копированию, Страница: 89 / 172

Результаты поиска

Содержание e-STUDIO 257

Отзывы: