Toshiba e-studio 2555c, Руководство по обслуживанию

Страница: 509 / 1558

6
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2555C/3055C/3555C/4555C/5055C
SETTING / ADJUSTMENT
6 - 83
6.9 Process Unit Related Section
6.9.1 High-Voltage Transformer Setting
The high-voltage transformers (PS-HVT) supply high-voltage to the parts related to charging,
development, transfer and Discharging blade.
The high-voltage transformer has the following high-voltage outputs.
Notes:
Never move the variable resistance on the board since the output adjustment has been
performed at the shipment for the high-voltage transformer supplied as a service part. Also do
not perform the setting change when the high-voltage power supply is replaced.
CH1 1 Main charger bias (Y)
2 Main charger bias (M)
3 Main charger bias (C)
4 Main charger bias (K)
CH2 1 Main charger grid bias (Y)
2 Main charger grid bias (M)
3 Main charger grid bias (C)
4 Main charger grid bias (K)
CH3 1 Developer bias (Y)
2 Developer bias (M)
3 Developer bias (C)
4 Developer bias (K)
CH4 1 1st transfer roller bias (Y)
2 1st transfer roller bias (M)
3 1st transfer roller bias (C)
4 1st transfer roller bias (K)
CH5 - 2nd transfer roller bias