manualshive.com logo in svg

Toshiba e-Studio 224cs, Руководство пользователя

Поделиться
Скачать
Toshiba e-Studio 224cs Скачать руководство пользователя страница 3

Preface > 3

P

REFACE

Every effort has been made to ensure that the information in this document is complete, 

accurate, and up-to-date. The manufacturer assumes no responsibility for the results of 

errors beyond its control. The manufacturer also cannot guarantee that changes in software 

and equipment made by other manufacturers and referred to in this guide will not affect 

the applicability of the information in it. Mention of software products manufactured by 

other companies does not necessarily constitute endorsement by the manufacturer.
While all reasonable efforts have been made to make this document as accurate and helpful 

as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or 

completeness of the information contained herein.
All rights are reserved by Toshiba tec corporation. Unauthorized copying, transferring, 

translating, or related actions are prohibited. You must obtain written permission from 

Toshiba tec corporation beforedoing any of the above.

© 2012 TOSHIBA TEC CORPORATION, All rights reserved.
Energy Star is a trademark of the United States Environmental Protection Agency.
Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
Apple, Macintosh, Mac and Mac OS are trademarks of Apple Inc.
Other product names and brand names are registered trademarks or trademarks of their 

proprietors.

This product complies with the requirements of the Council Directives 2004/

108/EC (EMC), 2006/95/EC (LVD), 1999/5/EC (R&TTE), 2009/125/EC (ErP), 

and 2011/65/EU (RoHS), as amended where applicable on the approximation 

of the laws of the member states relating to electromagnetic compatibility, low 

voltage, radio & telecommunications terminal equipment, and energy using 

products.

The following cables were used to evaluate this product to achieve EMC directive 
2004/108/EC compliance and configurations other than this may affect that compliance.

Working environment

From EMC (Electromagnetic Compatibility) point of view, the operation of this product is 

being restricted in following environment:

•

 Medical Environment: This product is not certified as a medical product according to the Medical 

Product Directive 93/42/EEC.

Any consequences resulting from the use of this product in restricted working environments 

are not the responsibility of TOSHIBA TEC.
The consequences of the use of this product in restricted working environments may be an 

electromagnetic interference with other devices or machines in the nearby surrounding 

area. This can result into malfunction including data loss / data error pertaining to this 

product or the other devices / machines involved in the electromagnetic interference.
Furthermore, for general safety reasons, the use of this product in environments with 

explosive atmospheres is not permitted.

CABLE TYPE

LENGTH 

(METRE)

CORE

SHIELD

Power

1.8

✘

✘

USB

5.0

✘

✔

LAN

7.0

✘

✘

Tel

2.0

✘

✘

Modular

7.0

✘

✘

Содержание e-Studio 224cs



























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды