manualshive.com logo in svg

Toshiba e-STUDIO 206L, Быстрый старт, Страница: 70 / 90

Поделиться
Скачать
Toshiba e-STUDIO 206L Скачать руководство пользователя страница 70

Chapter 6 INFORMATION ABOUT EQUIPMENT

Options

The following options are sold separately, and upgrade the performance of the equipment if installed. For details, 

contact your service technician or representative.

68

1.  

Original Cover (KA-1640PC)

This is used to hold an original. 

2.  

Reversing Automatic Document Feeder  
(MR-3021, MR-3022)

This unit automatically feeds a stack of originals one by 
one to have them copied. Install the MR-3021 in the  
e-STUDIO206L/256/306, e-STUDIO256SE/306SE, and the 
MR-3022 in the e-STUDIO356/456/506, 
e-STUDIO356SE/456SE/506SE.

3.  

Bridge Unit (KN-2520)

This unit acts as a relay for the Finisher and this equipment.

4.  

Job Separator (MJ-5004/MJ-5006)

Enables Faxes, copies and prints to be output onto 
separate paper trays.
Install the MJ-5004 in the e-STUDIO206L/256/306,  
e-STUDIO256SE/306SE, and the MJ-5006 in the  
e-STUDIO356/456/506, e-STUDIO356SE/456SE/506SE.

5.  

Offset Tray (MJ-5005)

Enables copied and printed sets to be collated or stacked 
in groups with each set being offset.

6.  

Paper Feed Pedestal (KD-1025)

This pedestal enables you to install the Additional Drawer 
Module (optional, MY-1033).

7.  

Large Capacity Feeder (KD-1026)

This feeder enables you to feed up to 2000 sheets (80 g/m

2

 

or 20 lb. Bond) of A4 or LT paper.

8.  

Additional Drawer Module (MY-1033)

This drawer can be added to the Paper Feed Pedestal 
(optional, KD-1025). Combined with the 2 drawers in the 
equipment, paper can be fed from 4 drawers in total.

9.  

Finisher (MJ-1101)

This Finisher enables sort/group finishing and stapling. 
The Hole Punch Unit (optional, MJ-6103) can be installed 
in this Finisher. The Bridge Unit (KN-2520) is required for 
the installation of this Finisher.

10.  

Saddle Stitch Finisher (MJ-1106)

This Finisher enables saddle stitching, in addition to sort/
group finishing and stapling. The Hole Punch Unit  
(MJ-6103) can be installed in this Finisher. The Bridge Unit 
(KN-2520) is required for the installation of this Finisher.

11. 

Saddle Stitch Finisher (MJ-1033)

This Finisher enables saddle stitching, in addition to sort/
group finishing and stapling. The Hole Punch Unit  
(MJ-6008) can be installed in this Finisher. The Bridge Unit 
(KN-2520) is required for the installation of this Finisher.
e-STUDIO506/506SE does not support this option.

12. 

Inner Finisher (MJ-1032)

This Finisher enables sort/group finishing and stapling
The Hole Punch Unit (MJ-6007) can be installed in this 
Finisher.
e-STUDIO506/506SE does not support this option.

6

7

8

3

4

5

15

9

12

14

11

13

10

1

2

For e-STUDIO206L/256/306/356/456/506, 

e-STUDIO256SE/306SE/356SE/456SE/506SE

For e-STUDIO356/456/506, 

For e-STUDIO206L/256/306,

e-STUDIO256SE/306SE

e-STUDIO356SE/456SE/506SE

Содержание e-STUDIO 206L



























































































Отзывы:

Нет отзывов