50
6
Close the front cover and then
the side cover by pressing the
round projections near the
side cover open button. The
indicator will go out and the
start (
) indicator will light
up.
SCAN HEAD LOCKING SWITCH
The scan head locking switch is under the document glass.
If the switch is locked (
)
, the unit will not operate. Unlock the switch (
) as
shown below.
To lock the scan head locking switch, hold up the catch in illustration
and turn the
center knob counter-clockwise 90 degrees until you hear a click.
When closing the covers, be
sure to close the front cover
securely and then close the
side cover. If the covers are
closed in the wrong order, the
covers may be damaged.
Even after a new toner cartridge is installed, the start (
) indicator
may not light up, indicating copying cannot be restarted (toner is not
sufficiently fed). In this case, open and close the side cover. The copier
will feed toner again approximately 2 minutes and then copying can be
restarted.
Lock
Unlock
Grasp here and turn in
the direction of the arrow.
A
A
