Toshiba e-studio 1050 Скачать руководство пользователя страница 198

Страница: 198 / 224

PTM 7-23

B070/B071

7.6 JAM CONDITIONS

1. The entrance sensor does not turn on when the copier has fed paper 426 mm

after the copier exit sensor turned off.

2. The entrance sensor does not turn off when the upper transport motor has fed

paper 1.5 times the paper’s length after it turned on.

3. The upper tray exit sensor does not turn on when the upper transport motor

has fed paper 574 mm after the entrance sensor turned on.

4. The upper tray exit sensor does not turn off when the upper transport motor

has fed paper 1.5 times the paper’s length after it turned on.

5. In sort/stack mode, the shift tray exit sensor does not turn on when the upper

transport motor has fed paper 733 mm after the entrance sensor turned on.

6. In sort/stack mode, the shift tray exit sensor does not turn off when the upper

transport motor has fed paper 1.5 times the paper’s length after it turned on.

7. In staple mode, the stapler tray entrance sensor does not turn on when the

upper and lower transport motor have fed paper 835 mm after the entrance
sensor turned on.

8. In staple mode, the stapler tray entrance sensor does not turn off when the

upper transport motor has fed paper 1.5 times the paper’s length after it turned
on.

9. In staple mode, the stapler tray paper sensor does not turn off within 250

pulses of the stack feed-out motor after it started.

10. In staple mode, the shift tray exit sensor does not turn off within 1,260 ms after

the stack feed-out motor started.

Содержание e-studio 1050

































































































































































































































Результаты поиска

Содержание e-studio 1050

Отзывы:

Toshiba e-studio 1050, Техническое учебное пособие, Страница: 198 / 224

Результаты поиска

Содержание e-studio 1050

Отзывы: