manualshive.com logo in svg

Toshiba e-studio 1050, Техническое учебное пособие, Страница: 162 / 224

Поделиться
Скачать
Toshiba e-studio 1050 Скачать руководство пользователя страница 162

 

 

PTM 6-13 B070/B071 

6.5.6 SHIFT MECHANISM 

 

 
The same shift mechanism is used for the upper tray and lower tray. 

Shift Roller Rotation 

The shift roller [A] is turned by the shift roller motor [B]. 

 

Shift Roller Horizontal Movement 

The shift roller is moved from left to right by the shift motor [C] and shift gear disk 
[D]. 
When the trailing edge of the copy passes the upper transport roller, the shift motor 
switches on, moving the shift roller to the left or right via the shift gear disk [D] and 
the link [E]. 
After the paper is delivered to the tray [F], the shift roller moves to the home 
position, detected by the shift HP sensor [G].  
The process is repeated for every page of the same set, when the trailing edge of 
the page passes the transport roller.  
For the next set, the shift motor rotates the gear disk in the opposite direction to 
shift every page of the next stack to the opposite side. 

 

Exit Guide Plate 

The guide plate motor [H] (a stepper motor) controls the opening and closing of the 
guide plate [I], via a cam and pin mechanism. The guide plate opens for each sheet 
to allow the shift, then closes to keep the sheet in the correct position for feed out. 
Two mylars [J] above the feed-out slot keep the copies straight in the feed path. 
The guide plate position sensor [K] detects whether the guide plate is open or 
closed. 

B468D105.WMF

[A]

[B]

[C] 

[D] 

[E] 

[F]

[G] 

[H] 

[I]

[J] 

[K]

Содержание e-studio 1050

































































































































































































































Отзывы:

Нет отзывов