Toshiba dynadock V, Руководство пользователя

Страница: 35 / 108

35
Using the dynadock™ and Adjusting Settings
Adjusting audio settings
❖
If you are using Mirror mode to clone the primary display’s
image on an external monitor, the dynadock™ will attempt to
use the same display mode on the external monitor that you
selected for the primary display. In some cases, however, this
may not be the most appropriate mode for the mirrored desktop
(for example, if the aspect ratio of the displays is not the same).
In these cases, change the primary display mode to match the
optimum display mode for the external monitor.
Adjusting audio settings
Configuring audio ports
You can playback or record audio either through the dynadock’s
audio ports or the docked computer’s audio ports. However, you
cannot use the audio ports on the docked computer and on the
dynadock™ at the same time.
By default, the audio ports on the dynadock™ are automatically
enabled each time you dock the computer. When you undock the
computer, the audio ports on the computer are automatically
re-enabled.
To change the default settings, you may need to manually adjust the
audio settings in Windows
®
, as described in this section. For
example, if you want to use the computer’s audio ports while the
computer is docked, you will need to change the default settings.
Configuring audio playback ports
1 Click the TOSHIBA dynadock Utility icon in the system tray/
notification area of your Windows
®
desktop.
(Sample Image) TOSHIBA dynadock™ V Utility icon
If the icon is not visible in your system tray/notification area, make
sure the dynadock™ is connected and docked, and then click the
Show Hidden Icons button [
], if necessary, to display hidden
icons.
2 Select Select Sound Device… from the menu.
NOTE