- 9 -
Upside
To Determine Which Set of Mounting Holes to Use
Mounting Holes (i)
• Installation to a wall or ceiling.
(Refer to section 5-1-2.)
• Installation to a switch box
positioned normally on a wall.
(Refer to section 5-1-3 (i).)
• Installation to a switch box
attached to a ceiling.
(Refer to section 5-1-3 (i) for
switch box orientation.)
TOP mark
This mark is supposed
to be upside.
Wire Hole
Mounting Holes (ii)
• Installation to a switch box positioned sideways on a wall.
(Refer to section 5-1-3 (ii).)
• Installation to a switch box attached to a ceiling.
(Refer to section 5-1-3 (ii) for switch box orientation.)
There are two different sets of mounting holes (i and ii).
The set to use depends if the camera is being mounted to a switch box or not and to a wall or
ceiling.
Note: When determining the orientation of the switch box take into consideration the viewing angle
of the unlock-button. If possible, conceal the unlock-button.
Downloaded from
www.Manualslib.com
manuals search engine
