Toshiba CS9001 SERIES, Технические характеристики

Страница: 10 / 18

D4134187A
8
5. Menu Display Details
SELECT Pressing the
△
/
▽
key once shows menu at the bottom right of the screen.
Pressing the key as many times as necessary to display the desired item and change the setting with
DATA + /
−
key.
No. Display item Details
1 DISP Clear Clears the displayed item.
2 Shutter
Sets the shutter speed.
* ALC MODE: Effective when AGC/MANU[ALC LED: lights (orange), unlit]
0 = OFF
CS9001 Series : 1/60(S)
CS9001P Series: 1/50(S)
1 = F. L
CS9001 Series : 1/100(S)
CS9001P Series: 1/120(S)
2 = 1/250(S)
3 = 1/500(S)
4 = 1/1000(S)
5 = 1/2000(S)
6 = 1/4000(S)
7 = 1/10000(S)
3 Gain
Sets the gain of video signals.
* ALC MODE: Effective when MANU [ALC LED: unlit]
0 = 0 dB (
×
1)
1 = +6 dB (
×
2)
2 = +12 dB (
×
4)
4 ALC Level
Sets the ALC / AGC video signal level.
* ALC MODE: Effective when ALC/AGC [ALC LED: lights (green, orange)]
0 (dark) to 5 (factory shipped data) to 12 (bright)
5 W.B. RED
Sets the white balance RED.
* White balance: Effective when MANU [W. BAL LED: unlit]
+32(R direction) to 0 (center: factory shipped data) to -32 (CY direction)
6 W.B. BULE
Sets the white balance BULE.
* White balance: Effective when MANU [W.BAL LED: unlit]
+50 (B direction) to 0 (center: factory shipped data) to -50 (YL direction)
7 AREA
Sets the ALC detection area.
* ALC MODE: Effective when ALC [ALC LED: lights (green)]
OFF = Full screen (factory shipped data)
ON = WIND (Fixed) (No window display)
8 ENHANCE
Sets the contour compensation level (H and V shared).
0 (OFF) to 2 (factory shipped data) to 15
9 SETUP
Sets the setup (pedestal) value.
0 to 8 (5 IRE: factory shipped data) to 15
10 Gamma
Sets the gamma value.
OFF:
γ
= 1
ON :
γ
= 0.45 (factory shipped data)
11 Save
Saves NO. 2 to No. 10 setting data to memory (USER AREA).
This is executed with DATA + key or - key.
CAUTION: If power is turned off without executing this command,
the changed data becomes invalid.
12 Reset
Read out the factory set data to memory (USER AREA).
This is executed with DATA + key or - key.
CAUTION: If power is turned off without executing Save command, the factory
set data will not be saved to memory (USER AREA).