manualshive.com logo in svg

Toshiba BMS-CT1280TU, Руководство пользователя

Поделиться
Скачать
Toshiba BMS-CT1280TU Скачать руководство пользователя страница 43

Touch Screen Controller

Owner's Manual

43

-EN

You can configure the air conditioners or the ON/OFF unit with a “Weekly schedule”, through which settings such as operation 
start/stop are changed depending on the specified time for any day from Sunday to Saturday, or a “Special day schedule”, 
through which settings are changed for special days such as national holidays or special holidays. The operation schedule is 
set on the [SCHEDULE] tab of the group screen or individual control screen.

●

 

NOTE

If a day is set in both the Weekly schedule and the Special day schedule, the Special day schedule applies and the Weekly 
schedule is disabled for that day.

This section explains how to view the [SCHEDULE] tab when setting the operation schedule.

●

 

NOTE

Refer to the description of the [CONTROL] tab for the display items that are not explained. (P.22, 24)

Group screen

The schedule set for the air conditioners or ON/OFF unit in the group is displayed in list format in time units.

Set the Operation Schedule

Screen description

No.

Functions

1

You can switch the display in day-of-week units.

2

Displays the setting screen of Special day schedule.

3

Displays the setting screen of Weekly schedule.

4

The schedule settings content (ON/OFF, Mode, Temp., Lock, more) is displayed.

5

The times when the schedule is executed and the air conditioners and ON/OFF unit for which the schedule is executed are displayed.

1

5

4

2

3

Содержание BMS-CT1280TU


















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды