Touch Screen Controller
Owner's Manual
60
-EN
You can set a user account to operate the Unit remotely.
* Remote operation can be used when the Unit is connected via LAN to a PC on which the Remote Control Software is
installed.
●
NOTE
• 128 users can be registered.
• Up to 16 users can log in at the same time.
• At least one user must be registered.
Add/change user account
Set an account for remote operation (User Account)
1
Tap [
1
-(2)
] with [
1
-(1)
2
To change, tap the row you want to change in the list
●
NOTE
The following users are registered in advance.
You can also change/delete users.
Name: TCC
Password: TCC
Level: Administrators
3
Tap [
3
-(1)
] or [
3
-(2)
]
In the following procedure, the screen in the case of addition is
used to explain.
4
Set Name (only when adding) and password
Tap the entry field to display the keyboard. After entering the
characters, tap [
4
-(1)].
●
NOTE
• The maximum number of characters is 24 alphanumeric characters.
• Tap [Shift] to toggle between upper case letters and lower case letters, and
numbers and symbols.
• Tap [Enter] to enter the next field.
• Tap [BS] to delete one character.
2
1
-(2)
1
-(2)
1
-(1)
1
-(1)
3
-(1)
3
-(1)
3
-(2)
3
-(2)
5
4
6
-(1)
6
-(1)
4
-(1)
4
-(1)
