15
Playback functions
5.375 x 8.375 ver 3.1
Initial setting
When you turn on this player for the first time, follow these steps:
1
A welcome page will be displayed when this product is powered on.
2
Press the
OK
button to enter language setting.
3
Select your desired language, resolution and aspect ratio by pressing the (
arrow)
buttons, and then press the
OK
button.
4
Press the
SETUP
button to exit the Setup menu.
Use the SETUP menu
1
Press the
SETUP
button.
The Setup menu will appear when the Blu-ray Disc™/DVD Player is not playing a disc.
2
Press the
SETUP
button to exit the Setup menu.
When playing a high-definition source, you must press the
STOP
button to enter the SETUP
interface.
Select menu display language
1
Press the
SETUP
button.
The General Setting menu appears.
2
Select
Language
, and then press the (
arrow) button.
3
Select
OSD
, and then press the (
arrow) button.
The language options may vary for different regions.
4
Press the (
arrow) buttons to select a language, and then press the
OK
button.
If this disc player is connected to a HDMI
®
-CEC compliant TV, skip this setting. It switches
automatically to the same OSD menu language according to your TV setting.
Playback functions
Basic playback
1
Press the
POWER
button on the remote control or the front panel of the player.
The Blu-ray Disc™/DVD Player turns on. The unit will take approximately 20 seconds to
warm up.
2
Turn on the TV, and then select the input setting on the TV that matches the connection
method you used to connect your player.
3
Press the
OPEN/CLOSE
button to slide out the disc tray.
4
Place a disc on the disc tray with the label facing up, and then press the
OPEN/CLOSE
button to slide back and close the disc tray. The disc loading time depends on the type of disc
you are loading. Loading a Blu-ray Disc™ takes a longer amount of time.
5
If the disc does not start playing automatically, press the
PLAY/PAUSE
button to start
playback.
6
If a Blu-ray Disc™ or DVD menu appears, use the cursor buttons to select
PLAY
, and then,
press the
OK
button to confirm.
7
To eject the disc, press the
OPEN/CLOSE
button.
Pause playback
1
Press the
PLAY/PAUSE
button to pause playback.
The sound is muted.
2
Press the
PLAY/PAUSE
button to resume playback.
Stop playback
1
Press the
STOP
button once to go to resume mode.
The resume logo appears on the TV screen.
2
Press the
STOP
button twice to stop playback completely.
/
/
