background image

6    1. Precautions

Keep away from microwave devices.
Communication performance may deteriorate or a communication error may occur due to radio interference 
emitted from the microwave device.
Since the Bluetooth and wireless LAN use the same radio frequency band, each radio wave may interfere with each 
other when they are used at the same time, causing a deterioration of communication performance or a 
disconnection of network. If there is any problem with connection, please stop using either Bluetooth or wireless 
LAN.
Do not use the product on a metal table or near a metal object.
Communication performance may be deteriorated.

Module Name: MBH7BTZ42

Module Name: RS9113DB

Bluetooth version:
Frequency:
Maximum Transmit:
Power:
Receive Sensitivity:
Data Rates:

Communication 
distance:
Certification (Module):
Antenna specification:
Peak Gain:

V2.1 + EDR
2.4000 to 2.4835 GHz
Class 2
+4dBm (Except antenna gain)
-87 dBm
1Mbps (Basic Rate)/2Mbps 
(EDR 2Mbps)/3Mbps (EDR 
3Mbps)
3m/360deg (For BA400 
specification)
TELEC/FCC/IC/EN
Mono-pole antenna
-3.6dBi (2.4GHz)

Standard:
Frequency:

Spacing:
Channel:

Antenna:

Communication 
speed/Modulation:

Receive sensitivity:
Transmission output:

IEEE802.11 a / b / g / n
2412 MHz to 2484 MHz/4910 
MHz to 5825 MHz
5 MHz (2.4GHz), 20 MHz (5GHz)
US: 1 to 11, 36 to 48, 52 to 64, 
100 to 116, 120 to 128, 132 to 
140, 149 to 165
Europe: 1 to 13, 36 to 48, 52 to 
64, 100 to 140
PCB Trace antenna (built-in 
module) @2.0dBi 
802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 
54 Mbps
802.11n: MCS0 to MCS7 with 
and without Short GI
OFDM with BPSK, QPSK, 16-
QAM, and 64-QAM 802.11b with 
CCK and DSSS
-97 dBm
18 dBm

CAUTION!

y

To avoid injury, be careful not to catch or jam your fingers while opening or closing the cover.

y

Do not touch moving parts. To reduce the risk that fingers, jewelry, clothing, etc., be drawn into the moving 

parts, turn off the power switch to stop movement.

Safety Summary

Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions 
necessary for safe handling are included in this manual. All warnings and cautions contained in this manual and 
written inside or outside of the printer should be read and understood before handling or maintaining the 
equipment.
Do not attempt to effect repairs to this equipment. If a fault occurs that cannot be rectified using the procedures 
described in this manual, turn off the power, then contact your authorised Toshiba Tec representative for 
assistance.

Safety Precautions

This Owner's Manual and the products (machines) which you have purchased contain indications which should be 
observed in order to use the machines safely and prevent harm to yourself and others and damage to property. 
The meanings of these indications and symbols are given below.
Read these indications and become familiar with their contents before reading this Owner's Manual.

Содержание B-FP2D-GH30-QM-S







































Отзывы: