62
Getting Started
Installing additional memory (optional)
5.375 x 8.375 ver 2.3
Sample removing the memory module
4
Complete the procedure by following steps 11 through 14
in
“Installing additional memory (optional)” on page 57
.
Checking total memory
When you add or remove a memory module, you can check
that the computer has recognized the change. To do this:
1
Click
Start
, then click
Control Panel
.
2
Click
Performance and Maintenance
.
3
Click
System
.
4
The
General
tab view automatically appears and shows
total memory.
If the computer does not recognize the memory
configuration, turn off the computer, remove the memory slot
cover, and make sure the memory module is seated properly,
as described in step
