109
Learning the Basics
Using Hibernation
5.375 x 8.375 ver 3.1
7
Click
Override all Modes with settings here
.
The Set the range window appears.
Sample Set the range window with DC only option
8
Do one of the following:
❖
Click
DC only
if you want the settings to apply only
when you are using battery power.
❖
Click
All
for the settings to apply whether you are
using battery power or outlet power.
9
Click
OK
to close the Normal Power Properties window.
10
Click
OK
to close the TOSHIBA Power Saver Properties
window, then close the Control Panel.
Starting again from Hibernation mode
To start the computer from Hibernation mode, press and
release the power button. The computer returns to the screen
you were using.
If you put the computer in Hibernation mode by closing the
display panel, you can start it again by opening the display
panel.
If your computer is running on batteries, you cannot start it
again by opening the display panel. To turn the system back
on, press the power button.