Toshiba 8200 - Tecra - PIII 750 MHz, Руководство пользователя, Страница: 62 / 300

62
Connecting Other External Devices
Using a mouse
keyboard. Don’t worry: you can use a key combination on the
external keyboard to emulate the
Fn
key. You can set up this key
combination through the Windows Control Panel Toshiba
Hardware Setup option icon. For more information about
Hardware Setup, see
“Hardware Setup” on page 181 .
Using a mouse
You may want to use a mouse instead of the computer’s built-in
pointing device, the AccuPoint II. You can use a serial mouse or a
PS/2-compatible mouse.
A serial mouse disables the AccuPoint II. A PS/2-compatible
mouse allows you to have the AccuPoint II active at the same
time.
Setting up a PS/2 mouse with the AccuPoint II
When you connect a PS/2-compatible mouse to the PS/2 port, you
may use the mouse, the AccuPoint II, or both.
CAUTION: When connecting any PS/2 device, Toshiba
recommends turning off your computer to prevent any
possible hardware damage.
PS/2 mouse with Windows 98 Second Edition
To set the PS/2 mouse to work simultaneously with the
AccuPoint II:
1 Click Start, Settings, then point to Control Panel.
2 Double-click the Toshiba Hardware Setup icon.
3 Select the Pointing Devices tab, then click Simultaneous.