Toshiba 58L9300U Скачать руководство пользователя страница 158

Страница: 158 / 202

158

Advanced features

NOTE

❖

Connectivity is not guaranteed for all devices.

❖

Some functionality may be lost with a USB HUB connection.

Supported file system:

❖

FAT16 and FAT32 (USB device, SD and SDHC memory card)

❖

FAT16, FAT32 and exFAT (SDXC memory card)

NOTE

You must obtain any required permission from copyright owners to

download or use copyrighted content. Toshiba cannot and does not grant

such permission.

Basic operation

Using MediaShare with a USB device or SD card

When Auto Start is enabled, you will be asked if you want to start the

MediaShare whenever a USB device or SD card is inserted. If Auto Start

is disabled (or if you want to connect to a media server on the network),

you must manually start the MediaShare from the Cloud TV Portal pages

or press the

MEDIA SHARE

buton on the remote control.

To change the Auto Start setting

Press the

SETUP

button.

Select

Options

MediaShare Setup

USB/SD Card Auto Start

and press the

button.

Press the

(arrow) buttons to select

Off

Auto Start

Insert a USB device into the USB port, or insert an SD card into the

SD card slot. A prompt appears.

Press the

(arrow) buttons to select

Yes

, and then press the

button.

Press the

(arrow) buttons to select

Videos

Music

, or

Photos

and then press the

button.

To change the device, press the

(arrow) buttons to select

the devices on the screen, and then press the

button.

Press the

(arrow) buttons to select the device and then press

the

button.

Press the

(arrow) buttons to select

and then press the

button.

Using the Cloud TV Service features

Содержание 58L9300U











































































































































































































Результаты поиска

Содержание 58L9300U

Отзывы:

Toshiba 58L9300U, Руководство пользователя, Страница: 158 / 202

Результаты поиска

Содержание 58L9300U

Отзывы: