Copyright 2010
All Rights Reserved
Page
1
of
4
How to upgrade the Software
<Preparation>
Whenever updating the Software, perform the
“Media Player setup” as below.
Otherwise software updating may not be stared.
1
Press the
“MENU” button on the remote controller.
・
Via LEFT/RIGHT or UP/DOWN button on the remote controller, select
☞
“Media Player”
☞
“USB Media Player”
☞
”Setup”
Note;
“Setup” may not be visible until you select it through “USB Media Player” menu.
2
Press the
“left or right” arrow buttons to select the “On” as shown in figure2.
Figure2
3
Press “EXIT” button on the remote controller to exit the “Menu”.
